Log messages

Documentation / Standard Edition / User Guide / Appendix / Log messages

Log messages

Log message No. 1: CONFIG PROPERTY

Brief
Log message which reports used configuration properties
Level
config
Message
Property: <Property>='<Value>' read from config
Arguments
Property
Name of the configuration property
Value
Configured value for the property
Description

For each configuration property this message is issued with its used value. Therefore the complete MyARM configuration is logged to the configured logging destination. Only the log messages until the logging configuration is read will not be logged.

Log message No. 2: CONFIG DEFAULT PROPERTY

Brief
Log message which reports used default configuration properties
Level
config
Message
Property: "<Property>" not found using default: '<DefValue>'
Arguments
Property
Name of the configuration property
DefValue
Default value used
Description

For each configuration property which can not be found in the current configuration the used default value is reported with the log message.

Log message No. 3: CONFIG PROPERTY ERROR

Brief
Log message which reports an error for a configuration property
Level
error
Message
Property: <Property>='<Value>' not valid. Using default: '<DefValue>'
Arguments
Property
Name of the configuration property
Value
Configured value for the property
DefValue
Default value used
Description

Some configuration properties allows only a set of defined values. If another value was specified in the configuration this error message is issued.

Log message No. 4: CONFIG PROPERTY FILE

Brief
Reports which configuration property file was used
Level
config
Message
Property file '<File>' used
Arguments
File
Name of the configuration property file used
Description

MyARM can be configured using configuration property files. This log message reports which file is used to read the configuration. Therefore it allows you to check your MyARM environment.

Log message No. 5: CONFIG VAR ERROR

Brief
An environment variable expansion failed for the report property key and value
Level
error
Message
Environment variable expansion failed for <Key>='<Value>': Variable <Variable> <Reason>
Arguments
Key
Property key which caused the error
Value
Property value which caused the error
Variable
Variable which caused the error
Reason
Reason of the error
Description

The value of the reported property key contains a reference to an environment variable and the expansion of this reference failed for the reported reason.

Log message No. 6: CONFIG URL ERROR

Brief
The configuration URL has an error
Level
error
Message
Configuration URL '<URL>': <Reason>
Arguments
URL
The URL which caused the error
Reason
Reason of the error
Description

MyARM uses configuration property files to read user defined configuration properties. A configuration property file is passed to MyARM via the MYARM_CONFIG_URL environment variable. The value of this variable is erroneous.

Log message No. 7: CONFIG NOT FOUND

Brief
The configuration could not be found
Level
error
Message
Configuration not found: <Reason>
Arguments
Reason
Reason of the error
Description

The MyARM configuration property file could not be found.

Log message No. 8: CONFIG OUT OF RANGE

Brief
The value of the configuration property is out of the given range. MyARM adjusted the used value
Level
error
Message
Property <Key>='<Value>' out of range [<Min>,<Max>] using <Used>
Arguments
Key
Property key which caused the error
Value
Property value which is out of range
Min
Minimum allowed value
Max
Maximum allowed value
Used
Used value
Description

The value of the reported property key is out of range and is adjusted by MyARM.

Action

Please configure the configuration property to an allowed value.

Log message No. 9: EVENTLOG CREATE FAILED

Brief
The creation of the MyARM event log channel under Windows failed
Level
error
Message
Can not create event log logger reason='<Reason>'
Arguments
Reason
Reason code of failure. A call to the registry failed
Description

To create an event log channel under Windows various variables have to be set in the Windows registry. The Reason code describes which registry call failed.

Action

Consult the MyARM support.

Log message No. 10: DYNAMIC OBJECT FAILED

Brief
A dynamic object (e.g. datasink or datasource) could not be loaded
Level
error
Message
Loading of dynamic object '<Object>' failed: '<Reason>'
Arguments
Object
The dynamic object which should be loaded
Reason
Reason code of failure
Description

MyARM uses a modular plugin concept for its datasink and datasources. These plugins are written as dynamic objects which are loaded during runtime of the application. The reported dynamic object failed to load into memory for the reported reason.

Action

Make sure you have not mixed different MyARM versions otherwise consult the MyARM support.

Log message No. 11: NO LICENSE

Level
error
Message
No license for <Name> available!
Arguments
Name
Name of the component the license check failed
Description

This message indicates that the named component is not licensed to you. It is possible that you mixed components of different MyARM editions.

Action

Please verify your MyARM installation and your license keys.

Log message No. 12: API ERROR

Brief
Reports an API error of the C, Java or C# API bindings
Level
error
Message
< Method>(): (rc='<Code>') '<Description>'. <Details>
Arguments
Method
Method or function name the API error occured
Code
Return code of the API method or function
Description
Brief description of the error
Details
More details if available
Description

MyARM detected an error during a API method or function call. This can be caused by passing some invalid parameters or some sort of ARM standard specification violation.

Action

Please read the MyARM users guide return code reference section for details on a specific error.

Log message No. 13: API WARNING

Brief
Reports an API warning of the C, Java or C# API bindings
Level
warning
Message
< Method>(): (rc='<Code>') '<Description>'. <Details>
Arguments
Method
Method or function name the API warning occured
Code
Return code of the API method or function
Description
Brief description of the warning
Details
More details if available
Description

MyARM detected a situation which is not standard compliant during a API method or function call.

Action

Please read the MyARM users guide return code reference section for details on a specific warning.

Log message No. 14: ERROR

Level
error
Message
< Message>
Arguments
Message
Error message
Description

General purpose error message which has no special association to a specific MyARM component.

Log message No. 15: STATUS

Level
status
Message
< Message>
Arguments
Message
The status message
Description

General purpose status message. This status message is issued within the Web-Analysis server part.

Log message No. 16: ARM DATA DROPPED

Brief
Log message which reports dropped ARM data
Level
error
Message
Could not process ARM data (defs='<Defs>', apps='<Apps>', trans='<Trans>', metrics='<Metrics>', logs='<Logs>') <reason>. ARM data is dropped!
Arguments
Defs
Number of definitions dropped (application-, transaction- or metric-definition)
Apps
Number of application instances dropped
Trans
Number of transaction instances dropped
Metrics
Number of metric instances dropped
Logs
Number of dropped log messages
reason
Description of the reason
Description

This message is issued when the ARM data cannot be passed to its datasink and the temporary file storage for storing ARM data has reached its limit.

Action

To resolve this problem check why the datasink is not available (database, network)

Log message No. 17: ARM DATA DROPPED TOTAL

Brief
Log message which reports the total number of dropped ARM data
Level
error
Message
Total number of dropped ARM data: defs='<Defs>', apps='<Apps>', trans='<Trans>', metrics='<Metrics>', logs='<Logs>')
Arguments
Defs
Number of definitions dropped (application-, transaction- or metric-definition)
Apps
Number of application instances dropped
Trans
Number of transaction instances dropped
Metrics
Number of metric instances dropped
Logs
Number of dropped log messages
Description

This message is issued when the MyARM agent is closed from the instrumented application and reports the total number of dropped ARM data (definitions, application- and transaction instances, metrics and log messages). This log message reports the sum of all dropped ARM data.

Log message No. 18: ARM TRAN CALLS STAT

Level
info
Message
Transaction function calls: start=<StartCalls>, stop=<StopCalls>, update=<UpdateCalls>, discard=<DiscardCalls>, active=<ActiveTrans>
Arguments
StartCalls
Number of calls to the arm_start_transaction() function call
StopCalls
Number of calls to the arm_stop_transaction() function call
UpdateCalls
Number of calls to the arm_update_transaction() function call
DiscardCalls
Number of calls to the arm_discard_transaction() function call
ActivteTrans
Number of currently active transaction measurements
Description

This message reports the number of calls to the appropriate ARM 4.0 C functions. It is usefull to monitor start and stop calls as well number of currently active transaction measurements during development and test phase of the ARM instrumentation. Also this information gives a hint if MyARM C ARM 4.0 transaction functions are called at all (start and stop calls increases).

Log message No. 19: MODULE NOT SUPPORTED

Level
error
Message
Configured <Type> name='<Name>' not supported
Arguments
Type
Type of module which is not supported (e.g. database, datasink or handler)
Name
Name of the module
Description

A configured database, datasink or handler is not supported by the current MyARM installation. Please check the users guide for supported modules.

Log message No. 20: MODULE CREATE ERROR

Level
error
Message
Cannot create <Type> name='<Name>': <Reason>
Arguments
Type
Type of the module where a create error occured (e.g. database, datasink or handler)
Name
Name of the module type
Reason
Reason for the creation error
Description

The creation of the named module (e.g. database, datasink or handler) was not successful. There are several reasons for such a failure:

  • Module not found
  • Wrong shared object module
  • Out of memory

Log message No. 21: MODULE NOT CONFIGURED

Level
error
Message
< Type> not configured
Arguments
Type
Type of the not configured module (e.g. database, datasink or handler)
Description

Please check the log file which configuration property caused this error message. The last config log message above this message caused it. The log level should be set at least to 'config'.

Log message No. 22: APP NOT STOPPED

Level
warning
Message
application instance app_handle='<AppHandle>' not stopped
Arguments
AppHandle
The handle as returned by the arm_start_application() function
Description

Within the C language binding a previously started application was not stopped before the instrumented application terminated or the libarm4.so was unloaded.

Action

Please verify your ARM instrumentation of the appropriate application or notify the vendor of the instrumented application that there is an ARM instrumentation issue.

Log message No. 23: TRAN NOT STOPPED

Level
warning
Message
transaction instance tran_handle='<TranHandle>' not stopped
Arguments
TranHandle
The handle as returned by the arm_start_transaction() function
Description

Within the C language binding a previously started transaction was not stopped before the instrumented application terminated or the libarm4.so was unloaded.

Action

Please verify your ARM instrumentation of the appropriate application or notify the vendor of the instrumented application that there is an ARM instrumentation issue.

Log message No. 24: POOL INFO

Brief
Reports resource allocation and usage information
Level
info
Message
< Name> pool info: min=<Min>, max=<Max>, allocated=<Alloc>, current=<Current>, total=<Total>
Arguments
Name
Name of the resource pool
Min
Configured minimal number of allocated instances
Max
Configured maximal number of allocated instances
Alloc
Maximal allocated instances at one time
Current
Currently used instances at report time
Total
Total number of used instances
Description

MyARM manages various resources in so-called resource pools. The following named resource pools are currently used:

  • Transaction for storing transaction measurement information
  • Metric for storing ARM metric information
  • ARMData for storing serialized ARM data

Log message No. 25: BLOCKED INFO DROPPED

Level
info
Message
Blocked response time information dropped maximum of <Number> block times reached
Arguments
Number
The maximal number of supported blocked times
Description

The maximal number of supported blocked times per transaction measurement was reached and a blocked time was dropped. However the blocked time is summed up in the global blocked time of the transaction measurement.

Log message No. 26: LICENSED INSTALLS EXCEEDED

Brief
Number of licensed installations was exceeded
Level
error
Message
Number of licensed installations (<Number>) exceeded
Arguments
Number
Licensed installations
Description

The number of licensed installations (system addresses) was exceeded and measurements were dropped.

Action
  • Please contact MyARM to increase the number of licensed installations

Log message No. 27: INIT FAILED

Level
error
Message
Initialization failed in module='<Module>' level=<Level>
Arguments
Module
The module which caused the initialization error
Level
The initialization level the error occured
Description

During initialization an error occured and the ARM agent is disabled or the daemon or tools terminated directly. Please take a look into the log file to get the cause of the error.

Log message No. 28: AGENT STARTED

Level
status
Message
Started MyARM <Agent> <Edition> Edition Version <Version> for <Platform><Licensee>
Arguments
Agent
Describes the started agent (e.g. 'ARM 4.0 for C' or 'ARM 4.0 for Java', etc)
Edition
Describes the MyARM edition of the agent (e.g. 'Java', 'Professional', 'Enterprise', etc)
Version
Describes the current version of the agent
Platform
Describes the platform which the MyARM agent runs on
Licensee
Describes the licensee of the MyARM agent if any
Description

When this log message is issued the MyARM agent is up and runnig.

Log message No. 29: THREAD STARTED

Level
status
Message
< Name> thread started
Arguments
Name
Name of the started thread
Description

MyARM uses different threads to fulfill its tasks. This message shows that the named thread was started successfully.

Log message No. 30: THREAD STOPPED

Level
status
Message
< Name> thread stopped
Arguments
Name
Name of the stopped thread
Description

MyARM uses different threads to fulfill its tasks. This message shows that the named thread was stopped.

Log message No. 31: REPEATED MSG

Level
info
Message
Last log message repeated <Count> times
Arguments
Count
Count of the repeated message
Description

The previous log message was issued count number of times.

Log message No. 32: ENTITIES INFO

Level
info
Message
< Stage> entities: defs=<Defs>, apps=<Apps>, trans=<Trans>, metrics=<Metrics>, logs=<Logs>
Arguments
Stage
The stage to provided entities information for. This can be 'Recorded', 'Processed', 'Stored', 'Read' or 'Forwared'
Defs
Number of ARM definitions
Apps
Number of ARM application instances
Trans
Number of ARM transaction instances
Metrics
Number of ARM metrics
Logs
Number of log messages
Description

This message show some internal information from the ARM agent about its handled entities so far. This log message is issued if the resource watch dog component is enabled.

Log message No. 34: DATABASE SQL ERROR

Level
error
Message
Error '<Error>' in SQL query='<Query>'
Arguments
Error
Describes the occured error
Query
The SQL-Query which caused the error
Description

The reported SQL-Query failed. Please contact the MyARM support.

Log message No. 35: DATABASE CONNECTED

Level
status
Message
Database connected
Description

Indicates that a connection to the configured database is established.

Log message No. 36: DATABASE LOST CONNECTION

Level
status
Message
Lost connection, try to reconnect
Description

The current connection to the configured database was lost during executing a SQL command. MyARM tries to reconnect to the database immediately.

Log message No. 37: TCPSINK CONNECT FAILED

Level
error
Message
Connect to myarmdaemon at '<Host>:<Port>' failed. Retry in <Retry> seconds. Reason: '<Reason>'
Arguments
Host
The hostname where the myarmdaemon run on
Port
The port where the myarmdaemon is listening for accepting new TCP sink connections
Retry
Number of seconds to retry next time to connect to the myarmdaemon
Reason
The reason why the connection failed
Description

Log message No. 38: TCPSINK ERROR

Level
error
Message
< Message>
Arguments
Message
The TCP sink error message
Description

This log message is issued whenever a protocol error between the TCP sink and the myarmdaemon is encountered. Also this message can occur if there exists network problems between the TCP sink and the myarmdaemon.

Log message No. 39: TCPSINK CONNECTION IDLE

Level
status
Message
Connection is idle since <Idle> seconds. Now disconnecting from myarmdaemon
Arguments
Idle
Idle time in seconds of the TCP connection
Description

The current TCP connection to the myarmdaemon is idle (not used) since the reported time in seconds and therefore the connection is closed.

Log message No. 40: TCPSINK CONNECTED

Level
status
Message
Connected to myarmdaemon
Description

The TCP sink connected to the myarmdaemon successfully. ARM data is now send to the myarmdaemon.

Log message No. 41: TCPSINK COMMAND

Level
info
Message
Command '<Cmd>' processed
Arguments
Cmd
The command which was received and processed
Description

The TCP sink received the specified command from the myarmdaemon and processed it.

Log message No. 42: TCPSINK CONNECTING

Level
status
Message
Connecting to myarmdaemon at '<Host>:<Port>'
Arguments
Host
The hostname where the myarmdaemon run on
Port
The port where the myarmdaemon is listening for accepting new TCP sink connections
Description

Indicates that the TCP sink tries to establish a new TCP connection to the myarmdaemon.

Log message No. 43: TCPSINK DISCONNECTED

Level
status
Message
Disconnected from myarmdaemon <Reason>
Arguments
Reason
A possible reason why the TCP sink disconnected from the myarmdaemon
Description

Indicates that the TCP connection to the myarmdaemon was closed.

Log message No. 44: CANNOT OPEN FILE

Level
error
Message
Cannot open file '<File>'. Reason: '<Reason>'
Arguments
File
The name of the file which could not be opened
Reason
Reason of the failure
Description

The reported file could not be opened due to the reported reason.

Log message No. 45: CANNOT READ FROM FILE

Level
error
Message
Cannot read from file '<File>'. Reason: '<Reason>'
Arguments
File
The file name where the error occured
Reason
The reason of the error
Description

During reading of a file (ARM data or runtime configuration files) an error occured.

Log message No. 46: FILESTORAGE STATE

Level
status
Message
State changed from [<old>] to [<new>]
Arguments
old
Old file storage state
new
New file storage state
Description

The file storage module has changed its state from the old to the new state. A state change indicates that the processing of ARM data within the file storage stopped (e.g. the new state is INACTIVE) or is started again (e.g. the new state is SCANDIR or READNEXT).

Log message No. 47: FILESTORAGE CORRUPT FILE

Level
warning
Message
File '<Name>' is corrupt
Arguments
Name
File name which is corrupt
Description

A corrupt file was detected.

Log message No. 48: FILESTORAGE FILE NOT PROCESSED

Level
info
Message
File '<Name>' not processed due to '<Reason>'
Arguments
Name
Name of the file which was not processed
Reason
The reason why it was not processed
Description

The file storage component could not process the reported file.

Log message No. 49: FILESTORAGE FILE PROCESSED

Level
info
Message
Processed '<Name>' file. Defs='<Defs>', Apps='<Apps>', Trans='<Trans>', Total files='<Files>'
Arguments
Name
Name of the processed file
Defs
Number of definitions dropped (application-, transaction- or metric-definition)
Apps
Number of application instances dropped
Trans
Number of transaction instances dropped
Files
Total number of files processed so far
Description

Informal message about a processed ARM data file.

Log message No. 50: FILESTORAGE DIRECTORY FAILED

Level
error
Message
Can't open directory <Name>'. Reason: '<Reason>'
Arguments
Name
Name of the directory which could not be opened
Reason
The reason why it was not opened
Description

The configured file storage directory could not be opened for reading.

Action

Please check the basic file storage configuration and make sure the process has appropriate permissions.

Log message No. 51: OBSOLETE

Level
info
Message
Obsolete
Description

Obsolete message

Log message No. 52: FILESINK CHECK DIR

Level
error
Message
Directory check for '<Dir>' failed: <Reason>
Arguments
Dir
Path to the directory which was checked
Reason
The description why the check failed
Description

The filesink checked the existance and permission of the configured directory where ARM data files should be written to. The directory must exist and the user on behalf the filesink was executed needs write permission for that directory.

Action
  • Please create the directory if it does not exist
  • Please set the correct write permissions

Log message No. 53: FILESINK ARMDATA INFO

Brief
Reports about a processed ARM data file
Level
info
Message
ARM data file: '<File>' contains defs='<Defs>', apps='<Apps>', trans='<Trans>', logs='<Logs>'
Arguments
File
Name of the processed file
Defs
Number of ARM definitions
Apps
Number of ARM application instances
Trans
Number of ARM transaction instances
Logs
Number of log messages
Description

This message reports the successful processing of an ARM data file by the filesink. The number of contained entites are reported.

Log message No. 54: FILESINK CANNOT MOVE FILE

Level
error
Message
Cannot move file '<File>' to '<Dir>': Reason '<Reason>', dropped ARM data: defs='<Defs>', apps='<Apps>', trans='<Trans>', logs='<Logs>'
Arguments
File
Name of the file which was not moved
File
Directory name where the file should be moved to
Defs
Dropped number of ARM definitions
Apps
Dropped number of ARM application instances
Trans
Dropped number of ARM transaction instances
Logs
Dropped number of log messages
Description

This message is issued when an ARM data file could not be moved to its destination directory.

Action
  • Please check the existance and write permissions of the destination directory

Log message No. 55: FILESINK MIN FREE

Level
error
Message
Minimum free disk space reached '<Free><=<Min>', dropped ARM data: defs='<Defs>', apps='<Apps>', trans='<Trans>', logs='<Logs>'
Arguments
Free
Current free disk space
Min
Configured minimum disk space
Defs
Dropped number of ARM definitions
Apps
Dropped number of ARM application instances
Trans
Dropped number of ARM transaction instances
Logs
Dropped number of log messages
Description

This message is issued when the disk space gets low and drops below the configured minimum disk space of the file datasink. Please check if the myarmfiled is running and processes stored files. Also check other system resources which may waste disk space.

Log message No. 56: FILESINK MAX USED

Level
error
Message
Maximum used disk space reached '<Used>>=<Max>', dropped ARM data: defs='<Defs>', apps='<Apps>', trans='<Trans>', logs='<Logs>'
Arguments
Used
Currently used ARM data disk space
Max
Configured maximum of used disk space
Defs
Dropped number of ARM definitions
Apps
Dropped number of ARM application instances
Trans
Dropped number of ARM transaction instances
Logs
Dropped number of log messages
Description

This message is issued when the used disk space of ARM data gets its configured maximum limit. Please check if the myarmfiled is running and processes stored files. Also check the destination datasink (e.g. the database or myarmtcpd) is up and running.

Log message No. 57: SOCKET TOO MANY CLIENTS

Level
error
Message
Server socket <Host>:<Port> maximum number of clients <Max> reached. Deny connect request from
Arguments
Host
The host/interface where the myarmdaemon is listening on
Port
The port where the myarmdaemon is listening for accepting new connections
Max
The maximum number of allowed clients
Description

The reported server socket has reached its configured maximum number of client and a new connection request was denied.

Log message No. 58: SOCKET ERROR

Level
error
Message
< Message>: Reason: '<Reason>'
Arguments
Message
The detailed message of the socket error
Reason
The reason of the error
Description

An error occured within the TCP sockets component.

Log message No. 59: SOCKET LISTENING

Level
status
Message
< Name> socket listening <State>
Arguments
Name
The name of the server socket
State
'enabled' or 'disabled' the listening socket
Description

Indicates that the specified listening socket changed its state.

Log message No. 60: SOCKET ACCEPT

Level
status
Message
Accept new <Name> <Client>
Arguments
Name
The listening socket name which has accepted a new client
Client
The client socket and its associated connection id
Description

Indicates that on the named listening socket a new client was accepted.

Log message No. 61: SOCKET CLOSED

Level
status
Message
Closed <Name> <Client>
Arguments
Name
The listening socket name for which a client connection was closed
Client
The closed client socket
Description

Indicates the on the named listening socket a client connection was closed.

Log message No. 62: SOCKET DEAD

Level
error
Message
client is dead closing connection
Description

Indicates that a client connection was detected to be dead and closed.

Log message No. 63: DAEMON STARTED

Level
status
Message
myarmdaemon started
Description

The myarmdaemon process is up and running.

Log message No. 64: DAEMON TERMINATING

Level
status
Message
Got '<Cmd>' terminating
Arguments
Cmd
Stop command or a quit process signal
Description

The myarmdaemon got a process signal or a stop command to terminate.

Log message No. 65: DAEMON TERMINATED

Level
status
Message
myarmdaemon terminated
Description

The myarmdaemon process terminated.

Log message No. 66: DAEMON CHANGED MAX OPEN FILES

Level
warning
Message
Changed max open files from <Old> to <New>
Arguments
Old
Old maximum number of open files
New
New maximum number of open files
Description

The configuration of the myarmdaemon exceeds the default maximum number of allowed open files and was changed to the new maximum number of open files.

Action

To avoid this warning change the OS default maximum number of open files.

Log message No. 67: DAEMON TCP CLOSE CONNECTION

Level
info
Message
Closing connection due to '<Reason>'
Arguments
Reason
Closing reason
Description

A client connection was closed due to the given reason.

Log message No. 68: DAEMON TCP SINK INFO

Level
info
Message
Sink info received: armdata.buffer.size=<BufSize>, flow control=<FlowCtrl>, split armdata.buffer=<SplitBuf>, keepalive=<KeepAlive>
Arguments
BufSize
The ARM data buffer size of the TCP sink client
FlowCtrl
Boolean which indicates if the TCP sink supports flow control ('on') or not ('off')
SplitBuf
Boolean which indicates if the TCP sink supports splitting of ARM data buffers
KeepAlive
Keep alive interval in seconds of the TCP sink
Description

Message which reports the TCP sink protocol information.

Log message No. 69: DAEMON TCP KEEPALIVE

Level
info
Message
Got keep alive message
Description

A keep alive message was received from a client connection.

Log message No. 70: RUNTIME CONFIG ACTIVATED

Brief
Informs about activation of a new runtime configuration
Level
status
Message
Activated new runtime config file: '<File>'
Arguments
File
Name of the runtime config file
Description

This message logs a successful activation of a new runtime configuration. The new runtime configuration is used from now on.

Log message No. 71: RUNTIME CONFIG FAILED

Brief
Informs about a failed activation of a new runtime configuration
Level
error
Message
Failed to activate new runtime config file: '<File>'
Arguments
File
Name of the runtime config file
Description

This message logs a failed activation of a new runtime configuration. The old configuration will still be used.

Log message No. 72: RUNTIME CONFIG ENTRY CREATED

Brief
Informs about creation of a new runtime configuration entry
Level
info
Message
Runtime <Type> '<Name>' created
Arguments
Type
Type of runtime config entry
Name
Name of runtime config entry
Description

This message logs a successful creation of a new runtime configuration entry. The new entry is activated when the rumtime configuration activated message is logged.

Log message No. 73: RUNTIME CONFIG ENTRY FAILED

Brief
The new runtime configuration entry could not be created
Level
error
Message
Failed to create runtime <Type> '<Name>'
Arguments
Type
Type of runtime config entry
Name
Name of runtime config entry
Description

This message logs a failure about the creation of a new runtime configuration entry.

Log message No. 74: RUNTIME CONFIG SAVED

Level
status
Message
Saved new runtime config to file '<File>'
Arguments
File
Name of the runtime config file which was saved
Description

This message logs that a new runtime configuration was saved to the reported file.